ZB-3
Installation
Instructions
INSTALLATION HARDWARE
Scan QR code below for
more products from viozon
Scan QR code
to get install video
X 1
Pole
X 1
Base Plate
X 1
Post Cap
4 / 5 / 6mm
Hex Wrench
X 1
Adaptor
X 1
Arm (α)
X 2
Arm (β)
X 1
Tablet Holder
X 1
Ring Fill Light
X 2
Universal Ball Head
X 2
Clip
X 1
Phone Holder
X 1
Extension Rod
Accessory
X 1
Microphone Main Stand
X 1
Microphone Holder
X 1
Laptop Plate
X 4
Screw Shim
X 4
Screws (M6x18)
X 1
Parallel Connector
Slide the plastic cover on the lower link upwards until it diengages,
then remove (A).Put power and monitor cables into the plastic
cover (B). Then slide the cover downwards until click into place (C).
A
A
B
C
CABLE MANAGEMENT
Remove cable clip (A) from the arm, thread cables, install cable
clip on the arm again.
Note: Open cable clip two sides.
Make sure to read the manual before installation and fully
understand how to install, if you have any questions, please visit
our website or contact the televant after-service.
Please use the supporting tools when installing. It is better be
installed by two people. Please be careful.
This product contains small parts, keep these away from children.
WARRANTY SERVICE
FEEDBACK
Never worried when you choose viozon products
We offer the best after-sale service to our customer,
it only takes few minutes.
And then you will get complete service such as installation
guide, technical support, new product reminder, privilege of
purchasing similar products, promotions and warranty service
from Viozon.
Viozon is focusing on high-standard products, we believe
that customers’ feedback drives us upgrading products.
Writing a review which sharing your experience will help
other customers. Also, your review will give us great
encouragement and confidence for future improvement. If
you have any questions, please feel free to contact us
without hesitation.
Share it?
Let us know with a customer review.
Just send you name and order number to
:
Viozon
FOR HELP PLEASE CONTACT US:
www.vio-zon.com
WARNING
TENSION ADJUSTMENT
If you feel the pitching angle is too tight or too loose when
adjusting the mount, please adjust the screws.
ARM ADJUSTMENTS
5MM
6MM
5MM
Scan QR code
get install video