9
Section 6: Basic Operation
1. Insert one end of the HDMI cable (included) into your PC’s graphics card. A VGA
cable (not included) may also be used.
2. Connect the other end of the cable to the corresponding port on your monitor.
HDMI Port
Audio Out
VGA Port
3. Connect the power cable to your monitor, then connect the other end to your
power source. It is recommended that you use a surge protector with adequate
voltage if a wall outlet cannot be reached directly.
4. Locate the power button on the monitor and press it to turn the monitor on.
If you cannot locate the power button, please refer to Section 3.1.
AMD FreeSync
The feature itself is off by default. In order to use this feature, please note you must
have hardware with FreeSync capability, an HDMI cable, and the latest graphic
drivers. To use this feature, connect your computer and monitor with an HDMI
cable. After connecting, you may receive a prompt to enable the feature on your
computer. If you do not receive the prompt, you may need to enable the function in
your graphics card menu. See your graphics card manufacturer’s documentation for
instructions on how to turn on and/or enable FreeSync.
Section 7: Indicator Light
Indicator Light
Solid blue light indicates power is on and the monitor is operating normally. Flashing
blue light indicates no video source, no horizontal or vertical signal has been
detected or voltage is low. Please ensure your computer is on and all video cables
are fully inserted and/or connected.
Summary of Contents for NBV27CB
Page 2: ......
