Viotek GN32DA, User Manual

Page: 7 / 20

7
Section 5: Wall Mounting
This monitor ONLY includes screws which can be used for attaching the monitor to a
mount. No mount or mounting accessory is included.
1. Open the package and take out the product with foam still attached. Gently place it on a
desktop or table. Remove the extra parts and the foam covering the monitor. If the monitor
is already attached to the stand, remove the stand.
2. Remove the original four screws from the opening in the back of the monitor (
1
).
3. Follow the directions received with your mount, stand, or accessory and install the monitor
on the wall or fixture as desired. Remember to use the included NO. 3 screws when
attaching anything to the back of the monitor. Refer to the image (
2
) for correct screw
placement.
- Do not discard the original screws.
- Use only the four NO. 3 screws (
2
) provided. You MUST follow the instructions
below for secure installation.
1
2
Use the 31mm
NO. 3 Screws x 2
Use the 26mm
NO. 3 Screws x 2
4. Follow the directions received with your mount, stand or accessory. Install the monitor on
the wall or fixture as desired.
Mount
(not included)