8
Section 5: Mount Installation
This monitor ONLY includes screws which may be used when attaching the
monitor to a VESA 75x75mm type mount. No VESA mount or mounting accessory
is included.
1. Open the package, take out the product with foam still attached, and gently place it on a
desktop or table. If the monitor is attached to the stand, remove the stand.
Stand Base
Foam
Stand Stem
2. Take out the two parts of the stand, remove the foam covering the back of the monitor, and
press the button to remove the stand plate.
Button
Stand Plate
3. Remove the original screws x 4 (
1
) from the opening in the back of the monitor, then use
the NO. 2 screws provided to secure the rear panel.
4. Follow the directions received with your VESA mount stand or accessory and install the
monitor on the wall or
fi
xture as desired. Remember to use the included NO. 2 screws
when attaching anything to the back of the monitor. Refer to the image (
2
) for correct
screw placement when attaching the monitor to a mount.
1
Use the 30mm
NO. 2 Screws x 2
Use the 26mm
NO. 2 Screws x 2
2
- Use only the NO. 2 Screws (30 mm x 2 pcs, 26mm x 2 pcs) provided with this
type of installation.
- Do not discard the original screws as these may be needed for future use.
Mount
(Not included)
