Notes About the Remote Control
Should you find the remote controls response gradually
decreasing in range, the batteries are most probably reaching
the end of their life. Replace both batteries with new ones,
preferably of matching brand and type.
Remote Control Operation Range
The area between the remote control and the main unit must be
clear of large obstacles.
Do not expose the remote control sensor to strong lighting,in
particular an inverter type fluorescent lamp.Otherwise,the
remote control may not work properly. If necessary, position the
main unit away from direct lighting.
¡
30
30¡
Within approximately
6m(19.7feet)
6
Battery Replacement
Notes
Notes
Since the remote control will be used for many of this unit's
control operations, you should begin by installing the supplied
batteries.
1.Turn the remote control over and slide the battery compartm-
ent cover in the direction of the arrow.
2. Insert the batteries(AAA,R03P,UM-4 TYPE) according to the
polarity markings on the inside of the battery compartment.
3.Close the battery compartment cover.
Use AAA,R3P,UM-4 batteries.
Be sure the batteries are correctly oriented according to polarity.
(See the illustration inside the battery compartment.)
Remove the batteries if the remote control is not used for an
extended period of time.
Should any battery leak, dispose of it immediately.
Avoid physical contact of leaked material with skin or clothing
etc. Clean compartment thoroughly before installing new
batteries. If in doubt, consult your dealer or service personnel.
Never dispose of batteries in a furnace or open fire.
Exposure to extreme heat or fire may result in an explosion
and cause possible injury!
Installing batteries in the remote controller
VOLUME
Getting Started ADP61
