… if you want to try yourself …
Reset of the remote control:
-
press “MAGIC“ for 3 Seconds
-
push 9 - 8 - 1 on the keyboard
-
a Reset is performed
To program a „foreign“ mode
The PRE V630 is controlled by a TV-Code !
Generally a TV code can only be programmed under the “TV” mode.
To enable the programming of a “foreign” mode (like “AMP”) the remote
control can be prepared as follows:
- press “MAGIC“ for 3 Seconds
-
push 9 – 9 – 2 on the keyboard, a LED flashes 2 x
-
select the mode which shall be copied by pushing the mode button
several times (in this case „TV“)
-
press “MAGIC“ shortly, the “TV“-LED flashes once
-
select the destination mode by pushing the mode button several
times (in this case “AMP“)
-
press “MAGIC“ for a longer time, the “AMP“-LED flashes 2 x
Now you can program a “TV“- Mode code in the “AMP“- Mode !
Program the PRE V630 code:
Please note:
the code used for PRE V630 is a very old TV code and so
chances are high that no other electronic item is controlled accidentally.
Before entering a code the destination has to be prepared when the
code is of “foreign” kind (see above).
- press “MAGIC“ for 3 Seconds
-
select the destination mode TV - SAT - DVD - AMP by pushing the
mode button several times
- push 0 – 0 – 3 - 7 on the keyboard, the affiliated LED flashes
several times
