15
Ex works the unbalanced outputs are set to “Post Fader” state.
The output level from the unbalanced outputs may be set to –6 / 0 / +6
dB by means of the dedicated dip switches. This ratios is relative to the
input signal and fully open volume control. Ex works the gain of the
unbalanced outputs is set to 0 dB.
See also page 7 (block diagram) and page 18 (technical Appendix)
THE BALANCED OUTPUTS
are situated on the rear panel of PRE
V630 in the field "ANALOG OUTPUTS "
and denoted as "RIGHT – BAL - LEFT".
They are equipped with gold plated XLR
sockets.
The balanced outputs always offer 6 dB
more level than the unbalanced outputs.
The output level from the balanced
outputs may be set to -9/-6/-3/0/+3/+6/+9
dB signal gain.
This ratios is relative to the input signal
and fully open volume control. Ex works
the gain of the balanced outputs is set to
0 dB.
See also page 7 (block diagram) and
page 18 (technical Appendix)
Attention:
All other maybe possible dip-switch
settings should be avoided !
