Violectric DHA V226, User Manual

Page: 21 / 32

User´s Manual DHA V226, November 2021, F. Reim
21
THE UNBALANCED HEADPHONE CONNECTOR
The DHA V226 offers a
stereophonic headphone
output, equipped with a
6.3 mm (1/4") TRS jack
socket.
THE UNBALANCED LINE OUTPUTS
are located on the rear panel of the unit and
are marked as “RCA OUT L/R”.
Gold-plated RCA connectors are
implemented here.
SIGNAL: PRE / POST FADER or FIXED-VARIABLE
The "SIGNAL" switch is located on the back
panel in the “OUTPUT” field.
The line out signal may be sourced from two
different positions inside DHA V226.
If you want to use the activated input signal as
is, maybe to source a unit with its own atten-
uator or a recording device, then the “PRE-FADER” or “FIXED OUT”
mode is the right choice. Here, the input signal is routed directly to
the line outputs without any alteration from the volume attenuator.
If you like to operate your DHA V226 as pre-amp device to drive
some active speakers or power amps, then “POST-FADER” or
“VARIABLE OUT” is the weapon of choice. Now, the line out signal is
attenuated by the volume control of DHA V226.
The signal level on the outputs is the same as the level on the
activated input.
Unbalanced Headphone Socket:
Tip Left channel
Ring Right channel
Sleeve GND