manualshive.com logo in svg

Viola Systems VIO2-16, User Manual, Page: 31 / 122

Share
Download
Viola Systems VIO2-16 User Manual Download Page 31

   

 

31 

5.5 Backup Device 

 

In Menu display, press 

▲▼

◄►

 to change the highlighted option to 

Backup Device

, 

and then press 

ENTER

 to call up 

Backup Device

 display as shown below. 

 

 

 
The  system  supports  a  variety  of  USB  2.0  storage  devices,  including  Storage  Disk 
such as USB 2.0 storage disk drives and 

DVD Disc (including DVD+RW, DVD+R, 

and DVD-R)

.    (DVD-RW is not supported.)    The operations are as below: 

 

!

 

▲▼

◄►

 

Press these buttons to select the items. 

 

!

 

ESC

 (Mouse: Right Click)

 

Press this button to escape from this screen, and return to previous display. 
 

!

 

Connect/Disconnect

 – If the specific backup device is disconnected (as shown in 

Current Status), please plug the USB device in one of the USB ports of the system 
and/or  insert  a  DVD  for  DVD  device,  and  then  press 

ENTER

 

(Mouse:  Left 

click)

 to command the system to connect with the device.    If the specific device 

is already connected (EX. Read/write, as shown in Current Status), please press 

ENTER

 

(Mouse:  Left  click)

  to  command  the  system  software  to  disconnect 

with the device, and then unplug the backup device from the backup port. 

 

Note  1: 

Please  DO  NOT  format  the  DVD  disc  for  better  performance  and 

compatibility.

 

 

Note  2:  Before  using  USB  pen  drive,  please  format  it  to  FAT32  file  system  by 

MS-Windows. 

 

Note 3: The backup device has to be connected by the system software before it 

can  be  used  to  read/write.    If  it  failed  to  connect,  please  unplug  the 
device, and then plug the device in the USB port again. 

 
Note 4: Some backup devices may have compatibility problems.    Please contact 

your local dealer or installer for the supported devices. 

Summary of Contents for VIO2-16



























































































































Reviews:

No comments