Viola Symphony Manual Rev 1
9 of 15
9
th
September 2005
Connect the bridging cable between the Fischer input connector on the right channel
and the XLR input connector on the left channel.
Connect right channel upper or lower red binding post on the rear of the Symphony
(which ever is convenient) to the input terminal , or colored red on the
speaker.
Connect left channel upper or lower red binding post on the rear of the Symphony
(which ever is convenient) to the input terminal marked -, or colored black on the
speaker.
These connections are shown in figure 3 below.
Figure 3. Bridge mode connection.
BI-AMPLIFICATION
Bi-amplification uses two stereo amp lifiers to power a single pair of loudspeakers.
One amplifier is used for each loudspeaker, with one channel driving the L.F. unit
and the other the mid/H.F. unit. Bi-amplification reduces the interaction not only
between the upper and lower frequencies, but also between the left and right
channels.
-
+
Symphony
Speaker
H
H
L
L
L
RED
BLACK
L
BRIDGING CABLE
Signal In
