Hardware Manual
Arctic AMR Hardware Manual
Firmware Version 1.x
18
Document Version 1.1
B
Cable gland
C
Cable gland plug
D
Power connectors
E
Serial port
F
Cable shield
G
Back panel
Warning!
The device uses lethal voltages. Device must not be operated before back
panel is mounted and securely tightened with torx (figure 8).
3.5
Mounting the device
Arctic AMR device can be mounted by using the mounting holes in the back
panel. With these holes, the device can be mounted on a flat surface, for
example a cabinet. If DIN rail mounting (35 mm) is needed, an optional DIN
rail mounting kit (product code 3003) can be mounted to the side panel.
Figure 10. Optional DIN rail mounting installed
