background image

 Installation

1. Do not install / mount the camera in a location that interferes with 
the driver’s visibility and safety.

2. Install / mount the camera close to the rearview mirror so that 
both sides of the scene being recorded are equally covered by the 
camera’s FOV (field of view).

3. To ensure a clear view on rainy days, the lens should be positioned 
within the windshield wiper’s sweeping range.

4. Do not install / mount the camera on or near airbag panels.

5. Installation / mounting location should not be affected by sun 
control film (window tint). There should not be any other electronic 
equipment close to the camera for optimal performance.

Note: 

Do not install / mount the camera or cables near an airbag panel or 
within the airbag’s working range. The manufacturer is not liable for 
any injury or death caused by the deployment of the airbag.

Tips

Operation

Loop Recording

Insert a micro SD card into the camera’s card slot and automatic loop 
recording will begin once the camera detects power.
Time frame for each video file is 1 / 2 / 3 / 5 / 10 minutes.
When there is insufficient space on the Micro SD card, loop recording 
will automatically overwrite the oldest files (one by one).
Loop recording files are saved to SD card: \ DCIM \ MOVIE folder.

1.

1.

2.

3.

2.
3.

4.

Operation

Power On / Off

When you start the engine, the camera will turn on and begin 
recording automatically. 
When you turn off the engine or unplug the charging cable from 
the power adapter, the camera will stop recording and turn off. 
Long press [           ] button to power on or off the camera.

14

13

Display Overview

00:00:20

2019-07-01 08 26 15

: :

4k 30fps

00

Recording Status
Emergency Lock

Parking Mode Recording

Recording Mode

4k 30fps

:00:00

Recording Time
Video Resolution

Microphone

Wi-Fi

WDR

GPS

SD Card

Summary of Contents for A129 Duo IR















Reviews: