the last 1/3 of a loop also saves the next loop until REC is pressed. Please note that no video is
saved in Loop mode unless TAG is pressed.
Once video is saved by pressing TAG, the saved segment is write-protected, meaning it cannot
be overwritten by subsequent saved video.
Loop recording lets you record events after they happen. This feature will help you maximize
card space by saving only video important to you.
The SD Memory Card
SD memory cards up to 2GB can be used in the POV.1. The 1GB SD card included with the
POV.1 has already been formatted. Any other SD card used in the POV.1 must be formatted
before use. To format an SD card, insert it into the POV.1 SD slot and then press the Settings
button once, navigate to "FORMAT SD CARD" and press soft keys as prompted to format the
card. WARNING: Formatting erases card contents!
Playback
To enter Playback, press [Play]. The display will show the opening frame of Clip 1 and indicate
the total number of saved clips. Press PREV or NXT to navigate to other clips. When the desired
clip appears, press the [Play] to play the clip.
During playback, the three Softkeys allow you to fast-forward, reverse play, pause and resume
play. Pressing [Play] during playback stops play and returns to clip selection.
Pressing << reverses play at 1X speed. Pressing << again speeds reverse play. After pressing <<,
normal play is resumed by pressing >>.
Pressing >> speeds forward play at 2X speed. Pressing >> again increases speed to 4X. Normal
play is resumed by pressing << until speed is 1X.
Video playback will appear in the POV.1 display or on a television connected to the POV.1.
Connecting to a television
Color-coded RCA cables are included with the POV.1 for connecting to a television monitor —
yellow for video, red for audio right, and white for audio left. After connecting the cables, press
the Settings button on the POV.1 and navigate to "VIDEO OUTPUT." Use PREV, NXT,
SELECT to choose the appropriate setting (NTSC for North American televisions, PAL for
European televisions). See your television manual for selecting the POV.1 as video source.
Settings
To access Settings, press the Settings button once. Use PREV and NXT navigate to the desired
setting and SELECT to make changes. Settings change from white to red during adjustment.