5. Attach drink tray to inside of organizer - towards pool.
The bolts required are packaged with the drink tray (see
Detail 1.7). Each connector plate has threaded grommets
to accept bolts. Use top two grommets. Tighten hardware
Detail 1.7
6. Attach hooks to outside of organizer -
outside of pool. The four bolts required are
packaged with hooks (see Detail 1.8). The
connector plate has threaded grommets to
accept bolts. Tighten hardware
Detail 1.8
7. Fit solar light into center of base plate (see Detail
1.9). Gently press solar light down until it is tight into
base plate. Turn top portion of solar light counter-
clockwise to remove. Remove protective strip to
activate light (see Detail 1.10 & 1.11). Put your hand
over top solar collector to test if light works (battery
may need to be charged). Fit light top back in place
and make certain it is secure
Detail 1.11
Detail 1.10
8. Your assembly & installation is
complete. Remove pool organizer
system for winter pool closure &
store in a safe place. It is
recommended to remove battery
from
solar
light
or
replace
protective strip as shown in Detail
1.11 - this will prolong life of
battery. Swim Safely
OPTIONAL 12 VOLT
IN-POOL LIGHT
We offer an optional in-pool light
that can be added to your pool
o r g a n i z e r
s y s t e m
( s o l d
separately). It is designed to fit
neatly behind the drink tray. Ask
your retailer for more information
or visit our website
Detail 1.9
RECYCLE RESPONSIBLY
RECYCLE RESPONSIBLY
RECYCLE RESPONSIBLY
RECYCLE RESPONSIBLY
DO YOUR PART
DO YOUR PART
DO YOUR PART
DO YOUR PART
