POOL ORGANIZER SYSTEM
POOL ORGANIZER SYSTEM
POOL ORGANIZER SYSTEM
POOL ORGANIZER SYSTEM
( Model ORGPP1)
( Model ORGPP1)
( Model ORGPP1)
( Model ORGPP1)
877-846-9595
www.vinylworkscanada.com
SEND US YOUR PHOTO !
Each season we select prize-
winning installations.
Send your high resolution image
today - visit our website
for more details
Required:
Required:
Required:
Required:
Pencil
Screw-
driver
Drill
Level
Included:
Included:
Included:
Included:
Base & Connector
Plates
Solar Light
Drink Tray
Hooks
ALL HARDWARE INCLUDED
Detail 1.1
1. Position base plate at
desired location around
pool. With suction cups
down, center on top rail
of pool. Every pool is
different;
don’t
be
alarmed about uneven
fit (see Detail 1.1)
2. Insert connector plates into base plate on
both sides. Connector plates can slide in &
out to fit different size pool top rails. Slide
until tight to top rail of pool (Detail 1.2 & 1.3)
Detail 1.2
Detail 1.3
3. With connector plates tight to top rail of pool,
pre-drill 1/8" holes at four corners of base plate.
Secure all four places with screws provided &
packed with connector plates (see Detail 1.4)
Detail 1.4
4. With base plate & connectors tight to top
rail of pool, level assembled parts front to
back (Detail 1.5). Note that each connector
plate has a range of holes facing the pool rail
(Detail 1.6). With assembly level, pre-drill a 1/8"
hole through the hole that meets edge of pool
top rail and secure assembly to top rail of pool
using remaining screws. Repeat for both
sides. Be cautious when using power tools
around water & keep debris out of water
Detail 1.5
Detail 1.6
