VinylWorks 2008AF Manual Download Page 4

NOTHING REPLACES

NOTHING REPLACES

NOTHING REPLACES

NOTHING REPLACES    

PARENTAL SUPERVISION

PARENTAL SUPERVISION

PARENTAL SUPERVISION

PARENTAL SUPERVISION    

Before  attaching  striker  &  latch,  be  sure  gate  is 
closed  and  pushed  DOWN  within  hinge  sets  (see 
3.2 above). Attach striker to gate (see 4.1). Striker 
is  to  be  outside  of  gate,  angled  appropriately.     
Secure  with  3/16  x  3/4"  bolts,  washers  inside  & 
nuts.  Tighten  hardware.  With  gate  closed,  down 
entirely, & striker in latch (see 4.2), position latch 
in  the  center  of  handrail  and  mark  holes  with   
pencil.  Make  certain  striker  is  centered  in  latch 
correctly  &  latch  is  closed  (see  4.2  &  4.3).  Pre-
drill  1/8"  holes  &  secure  using  #8  x  3/4"  screws 
(see  4.4).  DO  NOT

DO  NOT

DO  NOT

DO  NOT  over  tighten  screws  as  plastic 

may  strip.  Test  gate  to  be  sure  it  operates        
properly. Assembly is now complete - LOCK GATE 

LOCK GATE 

LOCK GATE 

LOCK GATE 

WHEN POOL IS NOT IN USE

WHEN POOL IS NOT IN USE

WHEN POOL IS NOT IN USE

WHEN POOL IS NOT IN USE (4.5)

 (4.5)

 (4.5)

 (4.5)    

FIT & SECURE GATE

FIT & SECURE GATE

FIT & SECURE GATE

FIT & SECURE GATE    

It  is  important  to  secure  the 
hinge  sets  (inner  &  outer) 
loosely so there remains a “gap” 
between  the  parts.  This  gap  
allows you to fit the gate in place 
between the inner & outer  hinge 
pairs;  both  top  &  bottom  (see 
2.1 - 2.3) 

LEAVE HINGES LOOSE

LEAVE HINGES LOOSE

LEAVE HINGES LOOSE

LEAVE HINGES LOOSE    

WITH GAP

WITH GAP

WITH GAP

WITH GAP    

Gently  pry  open  gate  hinge  sets  &  fit  gate 
between  the  inner  &  outer  hinge  parts  (3.1-
3.3).  The  “round”  posts  of  the  gate    will  fit 
through  the  gap  of  the  hinges  (outlined  in 
details above). Secure gate hinges using the 
remaining  1/4  x  3/4  bolts,  washers  &  nuts. 
Note  that  the  center  holes  only  require  the 
bolt & nut (no washers will fit). Use washers 
on  both  sides    for  the  remaining  hardware 
positions (3.4). Tighten all hardware & make 
certain gate opens and closes smoothly. 

2.2 

2.3 

3.1 

2.1 

3.2 

3.3 

3.4 

ATTACH STRIKER & GATE LATCH

ATTACH STRIKER & GATE LATCH

ATTACH STRIKER & GATE LATCH

ATTACH STRIKER & GATE LATCH    

877-VINYL WK 

www.vinylworkscanada.com  

Recycle Responsibly 

4.2 

4.4 

4.5 

4.1 

4.3 

Summary of Contents for 2008AF

Page 1: ...ate entry system on a solid base and free from high traffic areas around the pool Locate entry system on a solid base and free from high traffic areas around the pool Locate entry system on a solid base and free from high traffic areas around the pool Entry system Entry system Entry system Entry system MUST MUST MUST MUST be secured bolted to top rail of pool for greater stability and safety be se...

Page 2: ...and fasten using a 3 4 bolt double washer and nut for all four locations Tighten hardware The in in in in pool pool pool pool portion is complete see 5 6 Repeat for opposite side of step system exterior portion using the left handrail WITH WITH WITH WITH holes for gate on the exterior portion portion outside of the pool no weight required Make certain all hardware is tight and handrails are perfec...

Page 3: ...esigned with a protecting gate system These entry systems are designed with a protecting gate system These entry systems are designed with a protecting gate system These entry systems are designed with a protecting gate system NEVER use system without gate attached fully NEVER use system without gate attached fully NEVER use system without gate attached fully NEVER use system without gate attached...

Page 4: ...IS NOT IN USE WHEN POOL IS NOT IN USE 4 5 4 5 4 5 4 5 FIT SECURE GATE FIT SECURE GATE FIT SECURE GATE FIT SECURE GATE It is important to secure the hinge sets inner outer loosely so there remains a gap between the parts This gap allows you to fit the gate in place between the inner outer hinge pairs both top bottom see 2 1 2 3 LEAVE HINGES LOOSE LEAVE HINGES LOOSE LEAVE HINGES LOOSE LEAVE HINGES L...

Reviews: