9
TROUBLESHOOTING GUIDE
You can solve many common wine cellar problems easily, saving you the cost of a possible service call.
Try the suggestions below to see if you can solve the problem before calling the After-sales Service
Center.
PROBLEM
POSSIBLE CAUSE
Wine cellar does not operate.
•
Not plugged in.
•
The machine is turned off.
•
The circuit breaker tripped or a blown fuse.
Wine cellar is not cold enough.
•
Check the temperature control setting.
•
Check the temperature control setting.
•
External environment may require a higher setting.
•
The door is opened too often.
•
The door is not closed completely.
•
The door gasket does not seal properly.
Turns on and off frequently.
•
The room temperature is hotter than normal.
•
A large amount of contents has been added to the
wine cellar
•
The door is opened too often.
•
The door is not closed completely.
•
The temperature control is not set correctly.
•
The door gasket does not seal properly.
The light does not work.
•
Not plugged in.
•
The circuit breaker tripped or a blown fuse.
•
The bulb has burned out.
•
The light button is “OFF”.
Vibrations.
•
Check to assure that the wine cellar is levelled.
The Wine cellar seems to make too much
noise.
•
The rattling noise may come from the flow of the
refrigerant, which is normal.
•
As each cycle ends, you may hear gurgling sounds
caused by the flow of refrigerant in your wine cellar.
•
Contraction and expansion of the inside walls may
cause popping and crackling noises.
•
The wine cellar is not levelled.
The door will not close properly.
•
The wine cellar is not levelled.
•
The door was reversed and not properly installed.
•
The gasket is dirty.
•
The shelves are out of position.
