7
Do not connect the Wine Cellar to the mains electricity
supply by an extension lead. Extension leads do not
guarantee the required safety of the Wine Cellar (e.g.
danger of overheating).
The Wine Cellar must not be connected to an inverter and
must not be used with a plug adapter as these can cause
damage to the Wine Cellar’s electronic Wine Cellar.
The cord must rest securely behind the Wine Cellar and
not be allowed to lie or hang unprotected.
OPERATING YOUR
WINE
CELLAR
This Wine Cellar is designed for operation at certain
ambient temperatures. The climate class is specified on
the rating plate.
The Wine Cellar may not work properly if it is left for a
long period at a temperature outside the specified range.
For example, placing your Wine Cellar in extreme cold or
hot conditions may cause interior temperatures to
fluctuate. The range between 5ºC and 22ºC (41ºF and
72ºF) may not be reached.
Climate class
Ambient room temperatures
SN
N
ST
T
+10°C to +32°C
+16°C to +32°C
+16°C to +38°C
+16°C to +43°C
USE AND CONTROL
The Controls of Your Wine Cellar
Power:Turns the wine cellar system on or off.
Lighting:Turns the interior wine cellar light on or off.
Power/Lighting: Lock/Unlock button.
Temp. Up:
Increases temperature by 1°.
Temp. Down:
Decreases temperature by 1°
LOCK/ UNLOCK
1.Your wine cellar includes a feature that will lock the
control panel when if left untouched for 10 seconds.
2.To unlock the wine cellar control panel touch the
power and lighting buttons simultaneously for 3 seconds.
TEMPERATURE SETTING
1.Make sure power cord is connected to a properly
grounded outlet.
2.Turn power ON
3.The temperature for the wine cellar is 5 -22 ºC (41-72
ºF).
4.Directly touch the
or
mark to set the wine
cellar temperature as you want.
5.The first touch on
or
mark will recall the
previous set temperature displayed in the digital window.
6.Touch the mark
to increase the set temperature by
1ºC(or by 1ºF).
7.Touch the mark
to decrease the set temperature by
1ºC (or by 1ºF).
8.The digital will change to display the actual
temperature of the inside cabinet after 10 seconds
without being touched.
Note:
Temperatures may fluctuate depending on whether the
interior light is ON or OFF and depending on the
position of the bottles.
LAYOUT AND STORAGE
Your wine cellar is designed to store a
maximum number of bottles securely. We
recommend that you observe the tips below to
optimize loading:
1.Remove tape from shelves once unit is stable and
ready for storage.
2.Disperse the bottles evenly to avoid concentrating
weight in one place. Bottles must not touch either the
back of the cabinet or the step at the bottom.
3.While your wine cellar is designed to hold large format
bottles such as Pinot Noir and Champagne, these larger
NOTE:
•
When you use the appliance for the
first
time or restart the appliance
after having
been shut off for a long
time, there could
be a few degrees
variance between the
temperature you
select and the one
indicated on the
LED readout. This is
normal and it is
due to the length of the
activation time.
Once the Wine Cellar is
running for a
few hours everything will be
back to
normal.
•
If the Wine Cellar is unplugged, power
lost,
or turned off, you must wait 3 to 5
minutes before restarting the Wine Cellar.
If
you attempt to restart before this time
delay, the Wine Cellar will not start.
