Vinvautz VZ111SSFG, Instruction Manual

Page: 8 / 30

8
OTHER FUNCTIONS
Ø
To switch between ° C and ° F
You can select temperature display setting from Fahrenheit to Celsius degree by pushing the UP(+)
and DOWN(-) button at the same time for 3 seconds.
Ø
Attention
If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restart the unit.
If you need attempt to restart before this time delay, the wine cellar will not start.
For first time use or longer absence of using, the temperature will difference between setting and LED
display temperature. After running a certain period, the temperature will be reverted.
Ø
Temperature Memory Function
If the power is suddenly lost, the set temperature will be saved by the unit.
Once the power is back on, the unit will be at the same actual temperature.
Ø
Temperature Alarm Function
If the interior temperature is higher than 23°C (73°F), “HI” is shown on the display panel and the
buzzer alarm sounds continuously after one hour. This indicates that the inner temperature is too
high, please look for the reason. If the inner temperature is lower than 0°C (32°F), “LO” is shown on
the display panel; the alarm and the malfunction indicator light turn on at the same time.
Ø
Door Lock
Your unit is provided with a lock and key combination.
The keys are located inside the plastic bag that contains the instruction manual. Insert the key into the
lock and turn it counterclockwise to unlock the door. To lock the door, do the reverse operation
making sure metal pin is engaged completely. Remove the key and place it in a secure place for
safekeeping.
Note: During periods of high humidity, condensation may appear on outside surfaces of the
appliances.
This condensation will disappear once humidity levels drop. To prevent, it is recommended to install
the appliance with sufficient ventilation in a dry and/or an air-conditioned room. Please ensure that
doors are closing and sealing properly.
Ø
To remove the shelves:
To prevent damaging the door gasket, make sure to have the door all the way opened when pulling
shelves out of the rail compartment.
When removing/inserting the shelves from/into the shelf track, lift one side of the shelf as shown
in the picture below and pull the shelf out towards you, or push it in when inserting it, until one
side is securely seated on the shelf track.