15
Top clamp
Adjust a top clamp as follows:
Turn the clamp knob
to the vertical, ‘off’ position
Remove screw
. Using a suitable peg spanner, back off the threaded insert
slot by
slot until the leg is free to move under its own weight.
While sliding the leg in and out, gradually tighten the threaded insert
begins to grip.
If not aligned, back off the threaded insert
until a slot aligns with the hole for screw
.
Carbon fibre tripods (black legs)
- back off the threaded insert
two
slots.
Aluminium tripods (grey legs)
- back off the threaded insert
three
slots
Install screw
.
Top clamp
(23)
(22)
(21)