20
Section 3
Tools and Materials
General
1
The following special tools and consumable materials will be required
for servicing, disassembly, repair,
assembly and adjustment.
Special tools.
Consumable materials
ITEM
PART No.
PROCEDURE
Bearing press tool
3431-911TL
Installing needle bearing in
actuator shaft
Pin press
3431-912TL
Installing dowel pin to
connect actuator shaft and
adjustment slide
NOTE:
Adhesives and lubricants are not supplied by Vinten Broadcast Ltd and should be
obtained under local arrangements
ITEM
PART No.
USE
Grease, Rocol MT-LM
Z150-134
Lubrication
Grease, white Chesterton
Z150-105
Lubrication
Grease, Castrol LM
Z150-123
Lubrication
Loctite 222E
Z002-075
Screw locking
Loctite 380
Z002-078
Adhesive
Loctite 406
Z002-086
Adhesive
Loctite 415
Z002-062
Adhesive
Loctite 495
Z002-059
Spring cap buffer