17
10
The optional VHS adaptor (22) consists of a VHS pin and a 1/4 in. BSW camera mounting screw
connected by a plastic link.
11
To mount the camera using the VHS adaptor, proceed as follows
:
11.1 Remove the slide plate
from the head by releasing the slide plate clamp
, pressing the
slide lock release
and pulling the plate out to the rear.
11.2 Remove the two 3/8 in. BSW camera mounting screws
11.3 Position the VHS
adaptor in the longer slot in the slide plate, with the pin facing forwards.
Screw the pin securely into the slide plate.
11.4 Secure the slide plate to the camera with the 1/4 in. BSW camera mounting screw, ensuring the
pin engages in the hole in the camera.
11.5 Set the platform level and apply both the pan and tilt brakes (5, 7).
11.6 Push the slide plate and camera into the track in the platform, ensuring the slide lock release
snaps into position.
11.7 Balance the head
Fig 2.2 Optional VHS adaptor
(10)
(2)
(8)
(9)
(22)