code:
VIM 201301/S/01
13
SG2e models:
V30SG2e, V40SG2e AL/S3/BK models
The “UPPER CHAMBER LED” displays the upper chamber internal temperature
The “LOWER CHAMBER LED” displays the lower chamber internal temperature
To view the “set” temperature, press the corresponding button once, the “set” temperature
will temporarily “flash” in the LED display for 5 seconds.
Control panel of SG 2e model wine cellars
To modify the pre-set temperature of SG “2e” models
Adjust the desired cooling temperature by pressing the Set Upper or Set Lower buttons.
Each depression of the buttons will scroll through the available temperature settings in
increments or decrease of 1 degree Celsius. The temperature selected will flash in the LED
display for approximately 5 seconds and then revert to displaying the temperature of the
internal cabinet. The temperature setting can be adjusted from 6
℃
to 10
℃
in upper
compartment and 10
℃
to 18
℃
in lower compartment.
LED LIGHT
When equipped with an LED light, you may turn the LED light of your VINTEC wine
cellar on and off by pressing the “LIGHT” button on the control panel.
When on the LED light will automatically switch off after 10mins.
To maintain the light on continuously, press the “LIGHT” button for 5 seconds. An “LP”
sign will be displayed for a few seconds.
To switch off the light, simply press the “LIGHT” button.
To revert to the automatic switch off mode proceed as above. An “LF” sign will be
displayed for a few seconds.
