Vintec V190 SG2EBK, Instructions For Use Manual

Page: 19 / 24

19
GB
Fault Possible cause Remedy
The appliance is not The appliance is switched off.
the appliance is not plugged in
correctly. Reset the fuse.
Water collects in
cabinet.
The defrost water pipe is Clean the defrost water channel
and the drain hole on the rear
wall of the cabinet.
Vibration or
The appliance is resting against
Containers or bottles inside the
cabinet are rattling against one
another.
-
ances it is in contact with.
apart.
continuously.
P1 is shown on the
display. The upper sensor is disconnect-
ed or short-circuited.
-
tained at the higher of the two
setpoints until the fault has been
corrected.
P2 is shown on the
display. The lower sensor is disconnected
or short-circuited.
-
tained at the higher of the two
setpoints until the fault has been
corrected.