V40DG2EBK AL-V40DG2E
12
User Manual
TEMPERATURE SETTINGS
Important: The LCD displays by default the actual internal air temperature.
The temperature settings are pre-set at the factory as follows. In the event of a power
interruption, all previous temperature settings are automatically erased and it will revert to
the preset temperature settings.
Factory preset chart
Setting
Temperature
Right compartment: 12
12
ºC (+/- 2.5ºC)
Left compartment: 7
7
ºC (+/- 2.5ºC)
It is important to understand that there is a difference between the air temperature
inside the wine cellar and the actual temperature of the wine:
You will need
to wait approximately 12 hours before noticing the effects of temperature adjustment
due to the critical mass within a full wine cellar.
Once the temperature is set, it is strongly advised not to toy with it or adjust
frequently. The thermostat will maintain the temperature inside the wine cellar within
a +/- 2.5ºC range. But the thermal inertia of the wine and the glass is such that within
this temperature range, the actual temperature of the wine will only fluctuate 0.5ºC to 1ºC.
The “DISPLAY LED” displays the internal temperature. The set temperature
automatically appears by pressing either the UP or DOWN button.
To modify the pre-set temperature
Adjust the desired cooling temperature by pressing the UP or DOWN buttons. Each
depression of the buttons will scroll through the available temperature settings in
increments of 1 degree Celsius. The temperature setting can be adjusted from 6�
to 18�.
To view the “set” temperature, press and hold the UP or DOWN buttons, the “set”
temperature will temporarily “flash” in the LED display for 5 seconds.
