VintageView Vino Series Installation Instructions Download

Page: 1 / 3

Vino Series Stemware Rack

VR-SR Installation Instructions (wood wall surfaces)

The Vino Series Stemware Rack is the same product as the standard Vino Rails (VR) with adjusted spac-

ing to hold two typical red wine-sized glasses.

Video guides, spec sheets, and additional support are available at http://vintageview.com/support.

• (2) Vino Rails

• (2) Wood studs

• (2) Nuts or 2.5mm Hex

Key

Parts List

VR-SR

This configuration can be installed into 1/2” +

thick wood surfaces

Required Tools

• Level

• (2) 10mm (or adjustable)

wrenches

• Drill

• 5/32 (4mm) drill bit

Summary of Contents for Vino Series

Page 1: ...adjusted spac ing to hold two typical red wine sized glasses Video guides spec sheets and additional support are available at http vintageview com support 2 Vino Rails 2 Wood studs 2 Nuts or 2 5mm Hex...

Page 2: ...Wood Studs If supplied use the hex key to drive the Machine Lag Studs into the holes until the coarse threads of the lag screw are no longer visible Otherwise thread 2 nuts onto the fine threaded end...

Page 3: ...Vino Series Stemware should be regularly checked for tightness Should any part be found loose tighten appropriately until secure If the face of the wall surface shows signs of breakage discontinue use...