
USING YOUR AMPLIFIER
Front Panel
1.
INPUT Jack: Guitar/Instrument input.
2.
VOLUME Control: Controls the loudness of the guitar or instruments plugged
in the INPUT Jack.
3.
MASTER VOLUME Control: Controls the signal level to the power amplifier.
4.
TONE Controls: Treble, Middle, Bass, Presence.
5.
GAIN Control: Controls Preamp Gain
6.
POWER INDICATOR: Neon bulb: Illuminates when the amp is on.
7.
POWER Switch: In the ON position Applies 120VAC to the power transformer. In
the OFF position removes 120VAC from the power transformer.
8.
STANDBY Switch: In the OFF position, the STANDBY Switch allows voltage to
the tube filaments but stops high DC voltages to the tubes. When you turn the amp
on, allow the tubes to warm up 15 - 20 seconds before placing the STANDBY switch
in the ON position. The amp will not operate unless the STANDBY switch is in the
ON position.
Rear Panel
1.
AC Power Input: Connect the provided power cord to a grounded 120VAC 60Hz
household power source.
2.
FUSEs: 2A Slo-Blo fuse, 1A Fast Acting fuse
3.
SPEAKER Jack Connect to a 4, 8, or 16 Ohm speaker load. ONLY use a high
quality speaker cable. Do not use a guitar cable for a speaker cable.
IF YOUR AMPLIFIER WILL NOT TURN ON
Check the power to the unit. Check for tripped household circuit breakers, unplugged
extension cords or power-strip switches that may be turned off. Check the fuse(s). If a
dark brownish color or no wire can be seen within the glass fuse, then replace the fuse
with the same rating as originally installed. Over fusing the amplifier with a fuse of a
higher current rating, or shorting the fuse with aluminum foil etc. could be disastrous and
will void your warranty. The unit may be perfectly fine but occasionally the fuse may
blow because of high AC voltage surges. After the fuse has been replaced with the
proper value and, if the fuse fails again, the amplifier will require servicing . Also, check
your input and speaker output cables.
VVT Amps wants you to be happy with your amp so, if there are certain tonal
characteristics that you desire, we will assist you in those endeavors and make every
effort to help you get your mojo. There are many options for capacitors, transformers,
and speakers available at prices ranging from modest to outrageous. All of these
components affect the tone of your amplifier. Let us know if we can help.
The amplifier is only 1/3 of the equation. A good guitar with good pickups is 1/3. The
most important 1/3 is YOU.
Summary of Contents for The Regulator
Page 8: ......