Case & Crate
Bin Short (CC-BIN) Installation Instructions
The Bin Short is the base unit for all Case & Crate bin configurations.
Video guides, spec sheets, and additional support are available at vintageview.com/caseandcrate
• (2) Bin Side Wall
• (4) Bin Shelves
• (4) Levelers
Parts List & Configurations
• (4) Couplers (for vertical extension)
• (24) 5mm x 25mm Bolts with Nuts
• (1) Wall Anchor Bracket with
Bin/Locker Short (Figure A)
All parts included in this box for Bin; Locker Doors
(CC-LOCKER) required for Locker configuration
Bin/Locker Tall (Figure B)
Additional Bin needed (CC-BIN); Locker Doors
(CC-LOCKER) required for Locker configuration
Bin/Locker Extended Units (Figure C)
Bin Extension kits (CC-BIN-EX) required for modu-
lar, horizontal growth. Locker Doors (CC-LOCKER)
required for Locker configuration and additional Bins
and Extension Kits required for tall configurations.
• (1) Toggle Bolt