VINTAGE SOUND AMPS V40mvp, Manual

Page: 5 / 9

FRONT PANEL
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
1. CHANNEL 1: 1 - First input jack for guitar
2. CHANNEL 1: 2 - Second input jack for guitar with a lower impedance
3. VOLUME/BRIGHT CONTROL - Controls loudness of amp. When pulled, control adds brilliance to all
notes, especially higher frequency notes
4.
TREBLE - Controls high frequency response, complemented by bright switch
5. BASS - Controls low frequency response.
6. CHANNEL 2: 1 - First input jack for guitar
7. CHANNEL 2: 2 - Second input jack for guitar with a lower impedance
8. VOLUME/BRIGHT CONTROL - Controls loudness of amp. When pulled, control adds brilliance to all
notes, especially higher frequency notes
9. TREBLE - Controls high frequency response, complemented by bright switch
10.
MIDDLE - Controls (narrows) high and low frequency responses. Adds a rich tone and accents middle
register.
11.
BASS - Controls low frequency response.
12. REVERB - Adjusts the level of the Reverb effect. Reverb can be switched ON-OFF from the
Footswitch. Used in conjunction with DWELL {23} on rear of chassis.
13. SPEED - Adjusts the rate of the Vibrato effect. Vibrato can be switched ON-OFF from the Footswitch
14. INTENSITY –
Increases or decreases the Vibrato effect.
15. Power Indicator: Lights up when power is switched on. If bulb fails replace with type T47.
REAR PANEL
16 17 19 20 21 22 23 24 25 26 27 28 29
18
16. BIAS Ground. See NOTE below {20}.
17. BIAS Power Tube 1. See NOTE below {20}
18. BIAS Power Tube 2. See NOTE below:
NOTE
: See Bias Adjustment Video for using features {18} through {20}:
Video Tips: How to Bias your Vintage Sound Amp
19. SOLID STATE/TUBE RECTIFIER CONTROL: Switchable from solid state to tube rectifier
20. FUSE SLO-BLOW - The fuse protects the amp from electrical faults. Replace only with the same rating
and type (2.0 Amp Slo-Blow). If the amp repeatedly blows the fuse contact your dealer or Vintage Sound
Amps.