VINTAGE SOUND AMPS REVIBE VSRV, Manual

Page: 5 / 10

FRONT PANEL
1 2 3 4 5 6 7 8 9 10
1. ON - This switch turns the AC power ON and OFF. When the switch is OFF, the unit is completely
shut down
2. FUSE SLO-BLOW - The fuse protects the unit from electrical faults. Replace only with the same rating
and type (2.0 Amp Slo-Blow). If the effects unit repeatedly blows the fuse contact your dealer or
Vintage Sound Amps.
3. POWER Indicator: Lights up when power is switched on. If bulb fails replace with type T47.
4. SPEED - Adjusts the rate of the Vibrato effect. Vibrato can be switched ON-OFF from the Footswitch
5. INTENSITY - Adjusts the depth of the Vibrato effect.
6.
DWELL - The Dwell control
7. INPUT – Guitar input
8.
MIX – Mixes the amount of dwell or tone
9.
TONE – Tone control
10. OUTPUT – Output to amplifier
Line Cord: This effects unit is equipped with a grounding type supply cord correct to reduce the
possibility of shock hazard. Be sure to connect it to a grounded receptacle. DO NOT ALTER THE AC PLUG.