6
1966-67 CHEVELLE
WITH AC
904466 REV A 5/8/09 , 1966-67 CHEVELLE w AC EVAP INSTR PG 6 OF 22
BEFORE STARTING THE INSTALLATION, CHECK THE FUNCTION
OF THE VEHICLE (HORN, LIGHTS,ETC.) FOR PROPER OPERATIONS.
STUDY THE INSTRUCTIONS, ILLUSTRATIONS, & DIAGRAMS.
BATTERY, BATTERY TRAY (RETAIN)
DRAIN RADIATOR, REMOVE RADIATOR (RETAIN)
EVACUATE THE A/C SYSTEM IF NECESSARY
O.E.M. CONDENSER AND DRIER (DISCARD) SEE FIGURE 1
O.E.M. A/C LINES FROM COMPRESSOR TO EVAPORATOR (DISCARD) SEE FIGURE 1
O.E.M. COMPRESSOR AND BRACKET (DISCARD) SEE FIGURE 1
EVAPORATOR BLOWER ASSEMBLY (DISCARD)
TO REMOVE THE EVAPORATOR AND BLOWER ASSEMBLY (UNDER HOOD) AND THE AIR
DISTRIBUTION SYSTEM (UNDER DASH) THE FACTORY MANUAL RECOMMENDS REMOVING
THE RIGHT INNER FENDER.
OEM HEATER HOSES, A/C HOSES, AND HARDLINES (DISCARD). SEE FIGURE 1.
ENGINE COMPARTMENT
REMOVE THE FOLLOWING
(ONLY FOR 67 CHEVELLE w/ AC)
ONCE BATTERY IS REMOVED, REMOVE
A/C HOSES AND GROMMET FROM BESIDE
BATTERY TRAY. (RETAIN THE (4) OEM
GROMMET MOUNTING SCREWS)
NOTE:
INNER FENDER
COVER
640678-FCR
APPLY A BEAD
OF SILICONE
AROUND OPENING
A/C
HO SES
BATTERY
TRAY
(4) O EM
MO UNTING
SCREWS
GRO MMET
(4) O EM
MO UNTING
SCREWS
67 CHEVELLE
EVAPORATOR
BLOWER
HOUSING
COMPRESSOR
CONDENSER
DRIER
FIGURE 1
