background image

                                                       

 

                       

 

- 28 -

VINOTEMP will, at its discretion, repair or replace the unit and return it free of 
charge to the original retail customer. If the unit is found to be in good working 
order, or beyond the initial twelve month period, it will be returned freight collect. 
 

2. Limitation of Implied Warranty 

 

VINOTEMP’S SOLE LIABILITY FOR ANY DEFECTIVE PRODUCT IS LIMITED 
TO, AT OUR OPTION, REPAIRING OR REPLACING OF UNIT. 
 
VINOTEMP SHALL NOT BE LIABLE FOR: 
DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECTS IN THE UNIT, 
DAMAGES BASED UPON INCONVENIENCE, LOSS OF USE OF THE UNIT, 
LOSS OF TIME OR COMMERCIAL LOSS, ANY OUTER DAMAGES, 
WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE. 
 
THIS WARRANTY IS EXCLUSIBE AND IS IN LIEU OF ALL OTHER 
WARRANTIES, EXPRESSED OR INPLIED, INCLUDING BUT NOT LIMITED 
TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A 
PARTICULAR PURPOSE. 

               
While great effort has been made to provide accurate guidelines VINOTEMP 
cannot warrant its units to properly cool a particular enclosure. Customers are 
cautioned that enclosure construction, unit location and many other factors can 
affect the operation and performance of the unit. There for suitability of the unit 
for a specific enclosure or application must be determined by the customer and 
cannot be warranted by VINOTEMP.  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for Wine-Mate WM-2500SSVWC






























Reviews: