background image

                                                       

 

                       

 

- 28 - 

VINOTEMP  will,  at  its  discretion,  repair  or  replace  the  unit  and  return  it  free  of 
charge  to  the  original retail  customer.  If the unit  is found  to  be  in  good  working 
order, or beyond the initial twelve month period, it will be returned freight collect. 
 

2. Limitation of Implied Warranty 

 

VINOTEMP’S SOLE LIABILITY FOR ANY DEFECTIVE PRODUCT IS LIMITED 
TO, AT OUR OPTION, REPAIRING OR REPLACING OF UNIT. 
 
VINOTEMP SHALL NOT BE LIABLE FOR: 
DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECTS IN THE UNIT, 
DAMAGES  BASED  UPON  INCONVENIENCE,  LOSS  OF  USE  OF  THE  UNIT, 
LOSS  OF  TIME  OR  COMMERCIAL  LOSS,  ANY  OUTER  DAMAGES, 
WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE. 
 
THIS  WARRANTY  IS  EXCLUSIBE  AND  IS  IN  LIEU  OF  ALL  OTHER 
WARRANTIES,  EXPRESSED  OR  INPLIED,  INCLUDING  BUT  NOT  LIMITED 
TO,  IMPLIED  WARRANTIES  OF  MERCHANTABILITY  OR  FITNESS  FOR  A 
PARTICULAR PURPOSE. 

               
While  great  effort  has  been  made  to  provide  accurate  guidelines  VINOTEMP 
cannot  warrant  its  units  to  properly  cool  a  particular  enclosure.  Customers  are 
cautioned  that  enclosure  construction,  unit  location  and  many  other  factors  can 
affect the operation and performance of the unit. There for suitability of the unit 
for a specific enclosure or application must be determined by the customer and 
cannot be warranted by VINOTEMP. 

Summary of Contents for Wine-Mate 2520SSW-LA






























Reviews: