5
USA
Please read these instructions carefully be-
fore putting the appliance into service. They
are brief and contain only information which
will help you to obtain the best performance
from the appliance Take care of all acces-
sories supplied with the appliance.
Bottle capacity is dependant on shelf con-
figuration and bottle sizes.
On receipt, check to ensure that the ap-
pliance has not been damaged during
transport. Transport damage should be
reported to the local distributor before the
wine cooler is put to use.
Remove the packaging. Clean the inside of
the cabinet using warm water with a mild
detergent. Rinse with clean water and dry
thoroughly (see cleaning instructions page
18). Use a soft cloth.
If during transport the appliance has been
laid down, or if it has been stored in cold
surroundings (colder than +41°F), it must be
allowed to stabilise in an upright position for
at least an hour before being switched on.
Before use
The technical marking of the appliance can
be seen from the rating plate. (fig 1)
Important:
Wiring and connections in
power supply systems must been all appli-
cable (local and national) electrical codes.
Consult these codes lengths and sizes prior
to cabinet installation.
Power supply: (Grounded through 3 wire
power supply cord) 115V ac, 60 Hz Single
Phase
Maximum fuse size 10-13 Amps.
This appliance is equipped with a three-
prong (ANSI type 5-15P grounded) plug for
your protection against shock hazards. The
appliance should bee plugged in to properly
grounded three-prong receptacle
Do not under any circumstances cut or
remove the round grounding prong from the
appliance plug.
Do not under any circumstances use exten-
sion cords.
Technical data
fig. 1
Summary of Contents for VT-VC130RGS
Page 1: ...Instructions for use VT VC130RGS...
Page 11: ...11 USA fig 11...
