6
W W W . V I N O T E M P . C O M
BEVERAGE COOLER INSTALLATION
•
Remove the exterior and interior packaging before use.
•
Check to be sure you have all of the parts and 1 owner’s manual.
•
Place your beverage cooler on a flat, dry surface that is strong enough to
support the unit when fully loaded.
•
This unit is designed to be built-in (fully recessed) or free standing.
•
Do not place heavy objects on top of the unit.
•
Unit is not designed for installation in a garage, basement, or any other
location where a controlled ambient environment between 60° and 90°F
cannot be maintained.
•
For freestanding installation, 6” of space at the back, 10-12” of space on each
side, and unlimited clearance at the top of the wine cooler are suggested to
ensure proper air circulation to cool the compressor and condenser. Do not
place underneath a table, counter top, or anything of the sort as this will not
allow for proper air circulation.
•
Do not place the unit in direct sunlight or near sources of heat. Extreme hot
and cold ambient temperatures may cause the unit not to perform properly
or increase electrical consumption.
•
Do not place the unit next to a major appliance that emits large amounts of
heat, such as a dishwasher, microwave, oven, etc.
•
Do not plug unit into the same outlet as a refrigerator or microwave.
•
Before connecting the appliance to the power source, let it stand upright for
approximately 24 hours. This will reduce the possibility of a malfunction in
the cooling system from handling during transportation.
•
Clean the interior surface with lukewarm water using a soft cloth before first
use.
OPERATING INSTRUCTIONS
1.
Gently place/slide the racks into the beverage cooler.
2.
Determine the best temperature setting to use.
3.
Place bottles/cans inside the cooler.
4.
Plug the power cord into a standard grounded electrical outlet.
5.
Limit the frequency of opening the door to conserve energy and maintain
proper storage temperature.
6.
You can turn the interior light on and off by touching the button labeled
with a light on the control panel.
IMPORTANT: When using the beverage cooler for the first time, allow at least
24 hours for the internal temperature to adjust properly. Make sure there are at
least
3 to 5 bottles in the unit.
