1
0
10
W W W . V I N O T E M P . C O M
PROBLEMS WITH YOUR WINE CELLAR
You can solve many common wine cellar problems easily, saving you the cost of a possible
service call. Try the suggestion below to see if you can solve the problem before contacting
Vinotemp at [email protected]
TROUBLESHOOTING GUIDE
PROBLEM
POSSIBLE CAUSE
Wine cellar does not
operate
Check if unit is not plugged in.
Check if using wrong voltage.
The circuit breaker tripped.
Blown fuse.
Wine cellar is not cold
enough
Check the temperature control setting; external environment
may require a cooler setting.
The door is open too often.
The door is not closed completely.
The door seal does not seal properly.
The wine cellar does not have the correct clearance at the
back and two sides.
Light does not work
Call the service center.
Vibrations
Check to see that the wine cellar is level.
Wine cellar seems to
make too much noise
The wine cellar is not level.
Check the fans inside the cabinet and at the back of the unit.
Door will not close
properly
The wine cellar is not level.
The doors were reversed and not properly installed.
The seal is weak.
The shelves are out of position.
Temperature LED does
not display
Main control board does not work.
Temperature controller problem.
There is some problem with the plug (no power supply).
Temperature LED display
error
Temperature sensor is cut off.
Buttons are not functional
Temperature controller panel is damaged.
Supply cord is damaged
Cord must be replaced by the manufacturer or its service
agent or a similarly qualified person in order to avoid a hazard.
