5
i n f o @ v i n o t e m p . c o m
REVERSING THE DOOR SWING OF YOUR APPLIANCE
This unit has the capability of the door opening from either the left or right side. The unit is
delivered to you with the door opening from the left side. Should you desire to reverse the
opening direction, please follow the reversal instructions shown below.
NOTE: All parts removed must be saved to allow the door swing to be reversed.
1.
Remove the bottom hinge (2) by unscrewing the four lock screws (1). Be careful to hold
the door firmly after removing the screws. (Fig. 1)
2.
Gently pull down to remove the door from the right top hinge and place it on a padded
surface to avoid the risk of damage. Then remove the right top hinge (4). (Fig. 3)
3.
Unscrew and transfer pin (3) of the hinge plate to the opposite side. (Fig. 2)
4.
Pop out the cover caps on the left side of the cabinet and use them to
cover the screw
holes on the right hand side.
5.
Screw the alternative left top hinge (6), included in the fittings,
on the left hand side of the
cabinet. (Fig. 3)
6.
Rotate the door 180° and relocate it to the designated position. Then screw the bottom
hinge assembly on the left designated position and tighten it after the door is leveled. (Fig.
4)
7 3 2 S o u t h R a c e t r a c k R o a d , H e n d e r s o n , N e v a d a 8 9 0 1 5