9
1 7 6 2 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1
i n f o @ v i n o t e m p . c o m
ºF/ºC
Selector
Choose to display temperature setting in Fahrenheit or Celsius. To change the temperature display from
Fahrenheit to Celsius or from Celsius to Fahrenheit, touch and hold
for 5 seconds.
Key Lock
After 2 minutes of inactivity, the controls will be locked automatically. To release the lock, touch the
and
at the same time for 5 seconds.
TEMPERATURE ZONES
The wine cooler has two temperature zones with a temperature range of 40°-72°F. The recommended
temperature setting for each zone is:
•
Lower Zone
between 55°-72°F (Ideal for red and white wines)
•
Upper Zone
between 40°-55°F (Ideal for sparkling and white wines)
NOTE: The temperature set for the Lower Zone must always be the same or higher than the
temperature set for the Upper Zone. For optimal performance, the set temperature of the two zones
should differ by at least 4°F.
SETTING A TEMPERATURE
•
Touch
SET
to set the internal temperature for each zone. The degrees indicators will appear in the
display window marked
for UPPER ZONE and
for LOWER ZONE.
•
When you touch
SET
for the first time, the LED readouts will show the original temperature settings
(preset factory setting for UPPER ZONE is 10ºC / 50ºF and for LOWER ZONE is 16ºC / 60ºF).
•
Touch
SET
once. The left LED indicator for UPPER ZONE will flash. Then touch
UP
or
DOWN
to
set the desired temperature.
•
When you touch
SET
again, the right LED indicator for LOWER ZONE will flash. Then proceed to touch
the
UP
or
DOWN
to set the desired temperature for the LOWER ZONE.
•
The temperature will increase by 1°C or 1ºF if you touch
UP
once, or the temperature will decrease by
1°C or 1ºF if you touch
DOWN
once.
•
To view the set temperature in either zone at any time, touch
UP
or
DOWN
and the set temperature
will temporarily flash in the LED display for 5 seconds. You can touch
SET
to view the temperature
setting from one zone to the second zone.
NOTE
: When using the unit for the first time or after a long period of inactivity, there may be a variance of a
few degrees between the selected temperature and the temperature indicated on the LED readout. This is
normal due to the length of inactivity, and will correct itself after the unit is run for a few hours. If the unit is
unplugged, has lost power or is turned off, wait 3 to 5 minutes before restarting the unit. The unit will not
restart before this time delay.
STORING WINE
You can place 70 standard bottles in the upper zone with 10 bottles on each
shelf and 72 standard bottles in the lower zone with 10 bottles on each full
size shelf and 6 bottles on each half-size shelf. Approximate wine cooler
capacity is 142 bottles.
Note: Bottle capacities are approximate maximums when storing traditional
Bordeaux 750 ML bottles and may include bulk storage. Many bottles differ in
size and dimensions. As such, the actual number of bottles you may be able
to store may vary.
10 Bottle Arrangement
6 Bottle Arrangement
