background image

 

11 

TERMS AND CONDITIONS 

 

Vinotemp International (“Seller”) and the person or entity that acquires these goods from Seller (“Purchaser”) hereby fully agree to the following 

terms and conditions of the sale: Shipping fees are the responsibility of the Purchaser whether freight prepaid or freight collect. Seller assumes no 

responsibility for the goods sold to the Purchaser once the goods have left the Seller’s premises, including, but not limited to, late delivery by the 

moving carrier, or for events caused by any difficulty carrier incurs in attempting to fit the goods into the Purchaser’s place of business or 

residence due to the size of the goods or otherwise. Purchaser assumes all responsibility for delivery, payment of freight, access, measurement, 

installation, hook-up, wiring, moving and storage of the goods. The transportation of all goods is subject to the terms and conditions which the 

moving carrier imposes on Purchaser including, but not limited to, additional charges imposed per flight of stairs, and/or additional charges 

resulting from the carrier’s inability to safely and/or adequately use the building elevator to lift the goods to an upper floor. Any claim for damages 

incurred during shipment by the carrier of the goods are insured and handled directly with the carrier and must be noted at time of delivery. Any 

damages due to manufacture defects will be handled directly with Vinotemp International, subject to the limited warranty. 

 

All sales are final, and unless authorized in writing by the Seller, Purchaser may not return the goods, under any circumstance. If Purchaser refuses 

to accept the goods, under any circumstance, the Purchaser is liable for the return and cost of freight both ways, and if Seller does take back the 

goods, there will be a restocking/service fee that is 35% of the purchase price of the goods. (Product must be in original packaging). Built-to-Order 

products (including Cabinets, Racking, and Accessories) are non-returnable. Purchaser must notify Seller of non-conforming goods within four 

days of delivery, after which time all goods are deemed accepted. If an order has been placed and production has started, cancellation of your 

order will be a 15% charge. If Purchaser tenders payment with a check that has insufficient funds (NSF), or stops payment on a check or credit card 

for any reason, Purchaser agrees to pay for all costs associated with the Seller’s collection or litigation of such a claim, including without limitation 

extra damages, court costs and attorneys’ fees. Finance charges begin the date of invoice. Collection fees plus NSF fee of $50 will be added to your 

invoice, which you agree to promptly pay. Title to the goods does not pass until payment is received in full by Seller and Seller retains a security 

interest in the goods until they are paid for in full. Statute of limitations must be handled in arbitration in the County of Los Angeles. Purchaser is 

liable for any arbitration fees, including fees incurred due to credit card company arbitration. If the item is damaged by the freight company, 

Purchaser may cancel the order only by paying for freight costs both ways and restocking fee.  

 

LIMITED WARRANTY: Seller warrants that the goods will be free of defects in materials and workmanship as follows: Furniture style (wood) wine 

cabinets made in the U.S.: all cooling unit parts for a period of 5 (five) years; cabinetry and labor (uninstalled) for a period of 12 (twelve) months 

from date of sale. For the metal cabinet wine units: parts and labor for cooling system and cabinetry for a period of 12 (twelve) months from date 

of sale. For Designer Series units: parts and labor for a period of 12 (twelve) months from date of sale, compressor part 5 years. Thermoelectric 

Units: 90 (ninety) days from the date of sale (including Wine Coolers, Beer Dispensers, Humidor, Portofino Wood Cellars, and Refrigerators). Wine-

Mate Split Systems and installed products are parts only for 1 year, no labor. Other Wine-Mate Cooling Systems are 5 years parts, 1 year labor. 

Wine Accessories and Racking Systems are not warranted. There is no warranty on parts purchased separately. Removal and re-installation of unit 

is not included in warranted labor. Purchaser’s exclusive remedy is limited, at Seller’s option; to repair or replace defective part[s] with either new 

or factory reconditioned part[s]. Purchaser is responsible for shipping the unit pre-paid to designated facility and Seller will pay return shipping 

charges in the continental United States for items repaired under warranty within 12 (twelve) months from date of sale. Since the natural variation 

in texture, density, grain, color, tone and shade of wood is unavoidable; Seller does not guarantee the texture, color, tone or shade of the wood: 

nor does seller guarantee the colorfastness of wood or against peeling, chipping, cracking or scratching. Note: Unfinished wood is subject to 

warping; all wood surfaces must be sealed before placing cellar into service. Improper placement of the unit will void the warranty. By Vinotemp 

in writing, any third party repair facility must be pre-approved before providing parts free of charge. This limited warranty does not cover damage 

due to such things as accident, misuse, abuse, mishandling, neglect, acts of God, fires, earthquakes, floods, high winds, government, war, riot or 

labor trouble, strikes, lockouts, delay of carrier, unauthorized repair, or any other cause beyond the control of the Seller, whether similar or 

dissimilar to the foregoing. Seller is not responsible for any damages caused to Purchaser's property resulting from the good. This limited warranty 

applies only inside the Continental US (Alaska, Puerto Rico and Hawaii are not warranted.).  

 

For IL Romanzo units: CO2 Chiller, parts and labor for 12 (twelve) months from the date of sale. Wine Coolers, parts and labor 90 (ninety) days 

from the date of sale. Wine Cooler replacement part 12 (twelve) months from the date of sale. 

 

Summary of Contents for IL Romanzo IL-OW006-2Z













Reviews: