Vinotemp element VT-100MBWB, Owner'S Manual

Page: 12 / 20

.
V
I
N
O
T
E
M
P
.
C
O
M
OPERATING YOUR WINE COOLER
1
Light : Turn the light on/off.
2
℉
/
℃
Selector : Select the temperature display setting in Fahrenheit or Celsius degree.
3
Set temperature :To view the “set” temperature at any time, please press button. the “set”
temperature will temporarily “flash” in the LED display for 5 seconds.
4
The Symbol refers to the upper zone.
5
Temperature Display for upper zone.
The LED display will flash when setting the temperature.when not setting the temperature(normal
mode),this display will show the current temperature for the upper zone.
6
℃
/
℉
Display : These lights indicate if the temperature is being shown in Celsius or Fahrenheit.
7
Temperature Display for lower zone.
The LED display will flash when setting the temperature.when not setting the temperature(normal
mode),this display will show the current temperature for the lower zone.
8
The Symbol refers to the lower zone
9
Up : Use this button to raise the temperature in 1 degree increments.
10
Down : Use this button to lower the temperature in 1 degree increments.
11
Power : Use this button to turn the wine cooler ON or OFF. To power Off the cooler,
press for a minimum of 5 seconds. Press the same button to power ON.
Setting the Temperature Control
You can select temperature display setting from Fahrenheit to Celsius degree b touching the
℃
/
℉
Selector
mark. Fahrenheit or Celsius degrees indicator will appear in blue color in the temperature display window for
each zone. You can set the temperature as you desire by touching the UP and DOWN marks. When you
touch the two marks for the first time, the LED readout will show the original temperature set previously.
12
W W W . V I N O T E M P . C O M
.