9
5.5 REPLACING THE EVAPORATOR ASSEMBLY
2
4
1
3
1. Cut off the process tubes of the compressors at the specified place (to release the cooling media).
2. Using the welding gun to melt the interface between the evaporator and the condenser, and then pull out the
pipeline.
3. Remove the water tray
④
.
4. Remove 4 screws
①
and
③
of the evaporator.
5. Remove the evaporator
②
.
6. Install the evaporator in the box and lead the inner tank out of the muffler.
7. Apply 4 screws to fix the evaporator.
8. Inset the muffler of the evaporator back to the location of compressor muffler and weld it.
9. Perform vacuum pumping and fill cooling media.
