Vingtor Stentofon VMP-5004, Installation & User Manual

Page: 10 / 40

VSP-Ex System Installation & User Manual
6 A100K10872
6
Technical Data
6.1 Operative Unit VSP-512
Blue Terminal List X1
Blue Terminal List
X1
Microphone Capsule Line
Terminal 1-2
Speaker Capsule Line
Terminal 3-4
Call Out
Terminal 5-18
Ui 2.2V Inductance 0.75 uH Inductance 4.3 uH Uo 9.6 V
Li 200mA Impedance 150 ohm Impedance 180 ohm Lo 22 mA
Pi 0.35W Po 52 mW
Co 3.6
μF
Lo 70 mH
L/R 674 u
H/Ώ
6.2 Buffer Units VSP-5004 / VSP-5008 / VSP-5012
Blue Terminal List X10
Audio Signal
Terminal 1-4
Call Out
Terminal 5-6,7-8,9-10
Uo 2,2V Uo 9.6 Vac
Io 200mA Io 22 mA
Po 0.35W Po 52 mW
Co 100
μF
Co 3.6
μF
Lo 0.91 mH Lo 70 mH
L/R 71 u
H/Ώ
L/R 674 u
H/Ώ
6.3 Audio Accessories
Only Ex-certified audio accessories which comply with the input and output values in
sections 6.1 and 6.2 may be used with the Ex Products.
The following Zenitel accessories comply with the input and output values stipulated above, and
are approved for use with the Ex Products:
Ex audio accessories
2330040026 AK5850HS Ex-Approved Headset with plug **
2330040027 AK6797 Cable with latching switch for headset 10mtr.
1008150030 AK6799 Cable with latching switch for headset 20mtr.
** Headset AK5850HS is only certified for use in ATEX areas (NOT IECEx)