DOC NO.
Zenitel and its subsidiaries assume no responsibility for any errors that may appear in this publication, or for damages arising from the information therein. VINGTOR-STENTOFON products are developed and
marketed by Zenitel. The company’s Quality Assurance System is certified to meet the requirements in NS-EN ISO 9001. Zenitel reserves the right to modify designs and alter specifications without notice.
ZENITEL PROPRIETARY. This document and its supplementing elements, contain Zenitel or third party information which is proprietary and confidential. Any disclosure, copying, distribution or use is
prohibited, if not otherwise explicitly agreed in writing with Zenitel. Any authorized reproduction, in part or in whole, must include this legend. Zenitel – All rights reserved.
3.3 Flush Mounting Procedure
1. Mount the 2-gang back box into the wall
2. Mount the bracket onto the back box
3. Fit the gasket onto the bracket with the
ridged side facing down
–
Plug the Ethernet cable into the RJ-45 port on
the station
4. Mount the Turbine station onto the
bracket with the M5 fasteners provided
4
Connections
The Turbine SIP station has a RJ-45 PoE/LAN port, and 6-pin & 10-pin external connectors.
Ethernet /
Power
10/100 Mbps Ethernet RJ-45 port for LAN
(uplink) connection. Supports PoE (802.3af).
Draws power from either spare line or signal
line.
Secondary
Power
24 VDC (16 – 48 V) secondary power is provided
from an external adapter.
Relays
There is one Double Throw relay contact with
60W switching power. COM, NO, NC contacts
are provided. Max: 250VAC/220VDC, 2A, 60W.
Input/Output
6 I/Os are available. Each I/O can be configured
as either input, output, or LED driver.
Audio Line Out A balanced 600 ohm audio line out with
induction loop signal
L
Use cables crimped with ferrules for terminal block connectors
• When the station is connected to the network, its IP address is automatically
obtained from a DHCP server or an IP address in the range 169.254.x.x will be
assigned.
• To make the station speak its IP address, press the call button on the station.
2-Gang
Back Box
Gasket
1
3
Microphone
Bracket
2
Turbine
Station
4
1
5
4
3
2
1
6
10
5
4
3
2
9
8
7
RJ-45
PoE
port
24 VDC for external secondary power
if PoE is not used. Pin 1 is positive.
- 5.3V (LED driver)
- GND
- Input/Output 5
- COM relay
- NC relay
- NO relay
- Input/Output 1
- Input/Output 2
- Input/Output 3
- Input/Output 6
- 600 ohm balanced line out +
- 600 ohm balanced line out -
- Input/Output 4
Et
he
rn
et
C
on
ne
ct
io
n
29.8.2018
A100K11825
L
The Gasket MUST be mounted to seal the station!
L
Ensure the station is mounted verti-
cally with the microphone aperture
facing down.
L
Ensure there is enough clearance
under the station so that the micro-
phone aperture is NOT smothered.
L
Apply silicone sealant all around
the aluminum frame of the station,
making sure to leave the micro-
phone aperture open.