A100K 10430 v.1.0
ACM Telephone System – AMC-M-A
Page 27
6.5.2 Program different class of service for users
An ACM solution is usually programmed with the following Classes of
Service:
z
COS 1 Regular stations in the system
z
COS 2 Notify busy station
z
COS 3 Override of absent or private feature
z
COS 4 Busy override
z
COS 5 Override of busy, absent and private
z
COS 16 Includes all services. Default for SuperUser
Create a new Class of Service
z
Click on the
Class of Service
icon
-
The Class of Service window is opened
z
Select the Class of Service you want to modify and press
Change
-
A window to change the selected Class of Service is opened
z
Press the
Copy from
button and select
Default
-
The selected Class of Service gets the same service set as the
default station (Class of Service 1)
z
Select the services you want to assign to the selected Class of
Service
z
Press
OK
when all services are selected.
6.6 Configure Interface to PA
A normal subscriber (user) extension is used as interface from the ACM
system to the PA system. At each subscriber position the ACM has a
remote control output, where RCO1 is at subscriber position 1 and so
on. The RCO is used to signal PTT and muting of GA during emergency
PA to the PA system.
z
Press
User and Stations
icon
z
Select the subscriber position used as interface to the PA system
In ACM-M-A-V2 physical no. 8 is used.
z
Press
Events
z
Press
Insert
z
Select Event Type to
Audio
z
Press the
Detail
button
z
Select
Voice Paging
z
Press
OK
z
Select
RCO1
to be used to control PTT
z
Press
OK
6.7 Configure External Communication
See the A100K 10333 - SIP Gateway AudioCodes MP-114/118 manual
for information on how to program and configure external
communication.
Figure 26 COS feature selection