Vingtor Stentofon 1490000010 Quick Installation & Configuration Manual Download Page 6

Page: 6 / 12

Tips for Using the Keypad

Phone Configuration

For further information on the configuration of AlphaCom, SIP, and Pulse, please go
to wiki.zenitel.com.

Configuring the SDS-1 Using the Keypad

Make sure the phone is idle.

2. Press the

Menu

key to access the keypad menu to configure the phone.

3. Select

Phone

SIP

Account

to configure settings for

SIP Server

(AlphaCom

or Pulse),

SIP User ID

(Extension Number), SIP Auth ID and SIP Password.

4. Follow the menu options to configure the basic features of the phone, e.g. the

IP address if using a static IP.

Line Keys

Status Indicator

Message

Standard Keypad

Phonebook

Page/Intercom

Home

Hold

Softkeys

Menu/OK Key

Navigation Keys

Record

Headset

Speaker

Volume

Send

Transfer

Mute

Conference

To access the menu, press the round

Menu

key.

Navigate the menu by using the

Up/Down

and

Left/Right

arrow-keys.

3. Press the round

Menu

key to confirm a menu selection.

4. The phone automatically exits menu mode when there is an incoming call, the

phone goes off-hook, or when menu mode is left idle for 60 seconds.

Summary of Contents for 1490000010













Search results

Summary of Contents for 1490000010

Reviews:

Related manuals for 1490000010

Brands by name

Popular brands

Vingtor Stentofon 1490000010, Quick Installation & Configuration Manual

Search results

Summary of Contents for 1490000010

Reviews:

Related manuals for 1490000010

Brands by name

Popular brands