Vincent
35
OPERATING THE APPLIANCE
Operation
Button(s)
Description
Switch off tone control
(BASS/TREBLE)
TONE (4)
If the sound is not to be changed, it is recommended that you switch off
the sound control (BASS, TREBLE) with this button on the front of the devi-
ce. When this button is pressed, the sound processing settings in the tone
controllers (1)(3) come into play. If the button is not pressed, the two
sound controllers in the preamplifier are bypassed and the signals from the
source are not changed in terms of their frequency levels.
Change the brightness
of the tube window illu-
mination
DIMMER (15)
The display window for the visible tube (5) can be illuminated with one of
four brightness settings, if that is desired. Initially the brightness setting is at
maximum. By repeatedly pressing “DIMMER” all illumination levels are
available. After switching off the preamplifier the brightness setting is
saved until you use the device again.
Switching between
digital and analog
input signal
ANALOG/
DIGITAL (8)
If you should have connected devices on the digital Inputs (13) by optical
and coaxial cable you can choose these inputs by pressing the button
Analog/Digital (8). Herefor move the control dial on S5/OPT (7) to choo-
se a source which is connected by optical cable and S6/COA for choose
a source which is connected by coxial cable.
By not pushing the buttom the signal is passed by the analog inputs S5
and S6.
Summary of Contents for SA-T7
Page 58: ...58 Vincent NOTIZEN NOTES...
Page 59: ...Vincent 59 NOTIZEN NOTES...