VINCENT PHO-200, Instructions For Use Manual

Page: 20 / 50

20
Vincent
SAFETY GUIDELINES
Maintenance/Modifications
All equipment that is connected to the domestic mains voltage can be
dangerous to the user if not handled properly. Leave maintenance work
to qualified professionals. The product is only permitted for connection to
AC 230Volt/50Hz, for earthed sockets and use in enclosed areas.
Altering the product or manipulating its serial number voids the warran-
ty. After a fault, leave the appliance’s fuse to be replaced only by a pro-
fessional with one of the same kind.
Power Cable Connection
Always pull the plug and never the power cable if you want to dis-
connect the appliance from the mains power. Make sure when setting up
the appliance that the power cable is not squashed, severely bent or
damaged by sharp edges. Do not touch the power lead with wet or
damp hands. Use the power cable supplied or another one from Vincent.
Switching Off
Switch the appliance off every time before you connect or remove other
components or loudspeakers, disconnect or connect it to the mains
power, leave it unused for a longer period or want to clean its outside.
On all amplifiers and receivers, wait approx. 1 minute after this before
disconnecting or reconnecting the cable.
This appliance was produced under strict quality controls.
It complies with all established international safety stan-
dards. Nonetheless, the following instructions should be
fully read and observed in order to prevent any hazard:
Do not open the appliance! Risk of electric shock!
There are no parts in the appliance that require maintenance by the user.