VINCENT DAC-1 MK, Instructions For Use Manual

Page: 30 / 60

DAC-1 MK
DAC-1 MK
30
Vincent
CONNECTION TO AMPLIFIER,
RECEIVER OR PREAMPLIFIER
The DAC-1 MK has two analogue signal outputs on the back of the device. The signal can be input to a
traditional analogue audio component (amplifier) via the analogue outputs (6).
preamplifier, integrated
amplifier, receiver
LINE IN
CD
Use of the analogue output with XLR connectors
This is where the stereo audio signal converted to analogue by the high quality D/A converter and ampli-
fied by the output stage. Two XLR cables are required for connection to an amplifier. Connect the XLR con-
nectors “L” and “R” in the field “ANALOG OUTPUTS” (6) with the left and right connectors of the XLR
amplifier input which is usually labelled “CD,” “XLR IN,” “BALANCED IN” or “FRONT R/L”.
preamplifier, integrated
amplifier, receiver
BALANCED IN
CD
Use of one of the analogue outputs with RCA connectors
This is where the stereo audio signal converted to analogue by the high quality D/A converter and amplified
by the output stage. An RCA cable is required for connection to an amplifier. Connect one pair of RCA con-
nectors (“L” and “R”) in the field “ANALOG OUTPUTS” (6 with the left and right audio connectors of the ampli-
fier input (standard line level input) which is usually labelled “CD,” “LINE IN” or “FRONT R/L”. If you want,
you can use both outputs at the same time.
RCA connection
RCA connection
XLR connection