INTRODUCTION
Your High Performance Fan was build in accordance with approved safety regulations. A
security check and a final inspection were fulfilled. However failure to follow the correct
operation or misuse may result in serious personal injury, injury of a third party and/or
damage to equipment and other property.
Before you start any operation make certain that anyone who works on or around the fan
has read and fully understands the operation manual to avoid injuries and damage.
Follow all warning statements and labels placed on the fan!
The B.S. Belüftungs-GmbH will refuse any responsibility for personal injury, injury of a
third party and/or damage to equipment and other property caused by misuse and failure
to follow the safety instructions.
DESIGNATED USE
The fan was developed for tactical ventilation of burning structures during firefighting
operations to remove heat, gases and smoke from the interior. In addition the fan can be
used by construction contractors to temporarily control dust, fumes and unhealthy gases,
greatly improving safety and working conditions in confined spaces. Use the fan only for the
designated use.
The fan may be operated only by trained and introduced personnel. Continuous training as
well as instruction by experienced and skilled staff will assure proper and safe operations.
The minimum age for operators is 18 years.
The operator must stop the fan immediately at any malfunction which could affect the ope-
ration safety. Restart the fan only after the malfunction has been eliminated. The operator
is obligated to inform immediately his officer-in-charge. To keep the fan always ready for
operation, it should be maintained regularly.
MISUSE
The fan is not designed for permanent operation to cool or ventilate buildings or for suction
of smoke and gases.
HIGH PERFORMANCE FANS
Due to their air pattern HP-series fans can create a higher pressure inside the building
and allow a greater set back. A higher pressure makes ventilation of complex structures
and multi-level structures easier. The high speed of the air can cause the inside air to spin
rapidly. Therefore the rpm / air output of a HP-series fan must be adjusted carefully to the
actual structural condition.
15
EN
3
