background image

Lutron Electronics Co., Inc.
Made and printed in U.S.A.
P/N 045-005  Rev. 

B

  4/03

shading solutions by

VIMCO

TM

LIMITED WARRANTY

VIMCO will, at its option, repair or replace any unit that is defective in materials or manufacture within two years after purchase. Partial coverage is available for up to
eight years after purchase. For warranty service, either return unit to place of purchase, or contact VIMCO Shading Systems (subsidiary of Lutron) by telephone toll-free
at 1-800-446-1503, or mail to VIMCO Shading Systems, 11520 Sun Shade Lane, Ashland, VA 23005, postage pre-paid. For complete warranty details, refer to the war-
ranty sheet included with this system, or visit the VIMCO website at www.vimco.com. 

This warranty is in lieu of all other express warranties, and the implied warranty of merchantability is limited to two years from purchase.
This warranty does not cover the cost of installation, removal or reinstallation, or damage resulting from misuse, abuse, or improper or incor-
rect repair, or damage from improper wiring or installation. This warranty does not cover incidental or consequential damages. VIMCO’s liabil-
ity on any claim for damages arising out of or in connection with the manufacture, sale, installation, delivery, or use of the unit shall never
exceed the purchase price of the unit.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow limitations on how long an
implied warranty lasts, so the above limitation may not apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you.
Lutron, Sivoia, and the Sunburst logo are registered trademarks of Lutron Electronics Co., Inc. VIMCO and shading solutions by VIMCO are trademarks of Virginia Iron
& Metal Company, Inc.
© 2003 Virginia Iron & Metal Company, Inc.

Internet: www.vimco.com, www.lutron.com 
E-mail: [email protected]

Summary of Contents for LUTRON Sivoia V-FASCIA-1









Reviews: